Three Care Models

MHS SPECTRABRITE™

- Product Overview

- Light Therapy Programs

MHS Theralumen

- Product Overview

MHS Pain Therapy

- Product Overview

Contact Us

- Email: info@millennialhealthsystems.com

- Phone: 405-478-4351

- Fax: 405-478-4352

Recent Comments

    Archives

    Categories

    How It Works

    - Non-Invasive focused light

    - Delivers light energy to the body

    - Strengthens the immune system

    Benefits

    - Increased energy & endurance

    - Better Sleep

    - Boosts your natural immune system

    Personal MHS Immune Laser

    Wednesday, April 11, 2012 @ 03:04 PM  posted by Administrator

    The Original TheraLumen ™ Device

    Personal MHS Immune Laser

     

     

    CONFIGURATION:

    The Theralumen ™ device emits UV light in the germicidal and viruscidal, or UVC band, as well as visible light.

    An emitter housing is attached to quartz lightpipes that act as the delivery mechanism of these proprietary light frequencies.

    A small controller enables the operator to start and stop the time of operation.The Theralumen ™ lightpipes come in curved as well as straight models. The curved lightpipes are
    shown but we have found that most people prefer the straight lightpipes.

     

    LIGHTPIPE ASSEMBLIES:

    The Theralumen ™ is shipped with one straight lightpipe assembly. Additional lightpipe assemblies are available for purchase.

    The lightpipes can be sterilized in an autoclave or disinfected using other acceptable means.

    APPLICATION:

    It is a well known and established fact that ultraviolet light kills virus in the air, on surfaces and in water, including viruses and bacteria, a wide variety of molds, fungus and other pathogens.

    SETUP:

    Remove thumb screw from lightpipe assembly and insert lightpipe assembly into emitter housing.

    Insert thumbscrew and tighten.
    Connect USB cables to Controller and emitter housing.

     

    Connect adapter to Controller housing and plug into electrical receptacle. Now the unit is ready for
    operation.

     

     OPERATION:

    The Theralumen ™ is configured with two buttons, a green one which is the “START” button, and a red one which is the “STOP” button. A quick push of the “START” button begins the full protocol, which consists of five segments. The first of these 3 minute segments delivers visible pulsing light waves. Each of these 3 minute segments is programmed to address different pathogen groups in the blood. Following each segment there will be a short beep letting you know that the next segment has begun. The 15 minute treatment concluded with a longer beep.

    A long push of the start button puts the Theralumen ™ into continues mode and the cycle concludes in 7.5 minutes with a longer beep.

    CHANGING & CLEANING/DISINFECTING THE LIGHTPIPES:

    Unscrew the thumb screw which secures the lightpipe assembly and remove the lightpipe assembly. The lightpipes are made of pure crystal quartz and may be disinfected or sterilized by any means available: surgical solution, autoclave, or simply washing thoroughly and cleaning with alcohol or hydrogen peroxide. After cleaning, dry the lightpipe assembly. Do not over soak the lightpipe assembly during cleaning as long term soaking in liquid may disrupt the bond between the lightpipe assembly plug and the quartz lightpipes.

    USING THE Theralumen ™ :

    For water purification, hang the lightpipe assembly on a glass of water as pictured above, and run protocol. If using the lightpipes under the tongue, make sure they are not used longer than the treatment protocol run time.

    Do not use the Theralumen ™ for more than 15 minutes a day for the first week.

    If you feel overly fatigued, discontinue use for at least three days or until the abnormal fatigue subsides, and contact your medical professional advisor. Sinus drainage is a normal and expected consequence of using the device.

    Millennial Health Systems
    6701 N. Bryant
    Oklahoma City, Oklahoma 73121
    405-478-4351

    Comments are closed.